W.A.S.P.: Wireless Audio System Processor
Our W.A.S.P. system is the first ever In Ear monitoring system to utilize renowned WAVES™ algorithms to control and enhance the sound of your personal monitors.
It is also the first in ear monitoring system to include full control over USB for all DSP parameters and the ability to save them on a USB stick: Save and load your presets onto USB stick, no matter where you are you can carry your favorite setup for your In ear monitor sound and just load them into the system.
W.A.S.P. has 2 modes, Master and Slave, in Master Mode USB Flash drives can be used, while in Slave mode the unit can be connected to a computer and via the supplied software all the DSP parameters can be tuned and saved.
MAXX WAVES Algorithms
Includes the following Waves™ algorithms:
- MaxxVolume™ is an all-in-one volume control, with High Level Compression to increase RMS levels, Low Level Compression to increase the clarity of soft sounds, Noise Gating to eliminate signal and system noise, and Leveling to smooth out volume levels. Plus, MaxxVolume can be used to implement intelligent, manufacturer and user-defined ear protection mechanisms.
- Patented Waves MaxxBass™ psycho-acoustic bass extension delivers a more natural sound than traditional bass boost technologies, which use EQ and can overpower your system. MaxxBass analyzes low frequencies to create harmonics which are perceived as lower, deeper tones.
- MaxxTreble™ delivers crystal clear high frequency enhancement, for increased RMS without exceeding the system ceiling. Its proprietary algorithm restores luster to over-compressed formats, for the perfect listening experience.
- MaxxEQ™ gives you the power to design EQ curves and shape your sound with surgical precision, using 7 programmable filters with bell, shelf, low pass, and high pass, plus adjustable frequency, gain, and Q parameters. MaxxEQ’s intuitive Graphic User Interface makes click-and-drag filter design fast and easy.
- Based on the Waves professional S1 processor, MaxxStereo™ extends the span of stereo side content while maintaining the integrity of unprocessed center content. MaxxStereo improves the stereo separation of speakers, widening the stereo field for optimal imaging.
MX1T Transmitter Features
MX1T Features
- UHF band PLL synthesized design
- Frequency agility over a 2.4 GHz bandwidth
- Front panel monitoring headphone jack
- Oscillation Mode PLL Synthesized
- Modulation Mode FM stereo modulation
- Output power Low:<10mW; High: <100mW
- Spurious Rejection -60dBc
- Max. Deviation Range 25KHz
- Frequency response 50-15,000Hz
- T.H.D. <0.5%
- Audio Output Line level X2, XLR
- Audio Input 6.3mm phone jack x2
- Headphone Output Impedance >16ohm
- Antenna Connector TNT (50ohm impedance)
- Dimensions 210x175x45mm
MX1R Receiver Features
MX1R Features
- UHF band PLL synthesized design
- Frequency agility over a 2.4 GHz bandwidth, with 48 pre-programmed
- Frequencies available with the touch of a single button
- Dual-antenna true diversity reception. Eliminating signal dropouts and enhancing RF stability
- Dynamic expander circuitry delivers a S/N ratio greater than 90dB
- Signal indicators
- Highly efficient power consumption circuitry ensures long operating hours from two AA batteries
- POWER on/off RF signal indicators
- Oscillation Mode PLL Synthesized
- Modulation Mode FM stereo modulation
- Max. Deviation Range ±68KHz
- Receiving Mode Diversity receiving
- Receiving Sensitivity -107dBm
- Squelch Level -100dBm -90dBm -70dBm
- T.H.D. 1%
- Maximum S/N Ratio 94dBA
- Frequency Response 80Hz-15KHz ±3dB
- Stereo Separation 35dB
- Output Jack 3.5mm stereo earphone jack
- Output Power (32?) 2X50mW under 1KHz(THD 3%)
- Earphone Impedance 16ohm
- Power Supply 2 AA batteries
- Current Consumption 150mA
- Dimensions 123X65X27mm
Wallpaper
Wallpaper artwork for your computer
download W.A.S.P Wallpaper 2560px X 1600px
Wallpaper artwork for your iPad
